(Official?) Pocket Knife Discussion Thread

[SvilleKid]

Who carries, and what do you carry. Is your favorite knife your daily carry knife?

I only have 40-50 knives, most sitting in knife rolls in the closet. However, I carry two knives as a daily practice. I carry a Boker, assisted open folder, on a clip in my back pocket for quick access and heavy cutting. I carry a Wenger Huntsman model Swiss Army Knife (SAK) as my utility knife. The Boker goes in my right-rear pocket, the Wegner in my front-left pocket.

While these are my daily carries, I have a Camillius three blade that is a little over 4 inches folded that probably rates as my favorite. Not a glamour knife, and is carbon steel instead of SS blades, but it is one tough knife. Probably 25-30 years old, bone handle, and the steel will take an edge like no other knife I know. Used to be a daily carry, but is a little on the heavy size and lacks the "extra" tools on my SAK.

For serious backpacking trips, I have a Blackhawk that has a large drop point blade (locking, almost 6 inches) and one efficient saw blade that will cut through a tree if needed. This is my second favorite knife.

For more serious work, I have a two knife set of Buck skinning knives I use for my deer cleaning needs. Both are drop point, nice balance and weight, with rubberized handles. I actually like the smaller 4 inch blade over the larger 7 to 8 inch blade.

There you have it.

What do you guys carry and why.

[jjirons69]

I have my little buddy after carrying all sizes over the years. It's now a Case XX Limited Edition Peanut, green/yellow stag. 2 7/8" closed, two blades. Good for about anything except killing large mammals. It's handy for anything I need it for and does a job on my leftovers for lunch at work. Small enough not to weigh down my pocket. She's 10 years and aging well, plus I don't go anywhere without her.

Mine is greenish/yellow, not lime green like the stock picture.

http://i160.photobucket.com/albums/t178/jjirons69/16073.jpg

[mugwump]

I went through Benchmade, Spyderco, and Kershaw phases and now I'm on a Boker kick. I like their style and functionality and most of all their price so I don't have to worry about losing one. Lately I've been seeing if I can get by with the itty bitty Keycom like this one here:

http://i17.photobucket.com/albums/b85/mugwump867/keycom.jpg

I also carry a Vic Scientist:

http://i17.photobucket.com/albums/b85/mugwump867/sakscientist.jpg

[Starscream]

Old school Case pocket knife that belonged to my grandfather.

[smokeyandthebandit05]

I recently got a benchmade griptilian with a standard style blade with 1/2 seraided (sp?) and the black coating on the blade. I need to clean her tomorrow and when Im dont I'll take some pics and get em up here

[kwoody]

I guess I am less of a man

http://home.comcast.net/~massbackwards/husky.jpg

but in black, and green.

[Diesel Kinevel]

Benchmade Griptillian

[doctorcue]

I've been carrying this knife for about 3 years now. Blackhawk Mark II. Here is a picture from the factory website:

http://img.photobucket.com/albums/v213/doctorcue/MOD_MARKII.jpg

What the picture doesn't show is the carbide glass breaker at the end of the handle. Great knife!

[awsmith4]

I carry a SOG Flash 1

http://i250.photobucket.com/albums/gg250/awsmith4/Cigar%20Pics/SOG.jpg

[Wolfgang]

My newest aquisition. I have been carrying it for about 2 weeks and i love it!

Im Mark and i have an addiction. (besides cigars)

Talk about Not cheap! I Just got home form the gun show With my favorite knife so far!

Lone Wolf
Daiblo-DA
CPMS30v
Dual Action
Titanium Coated

[Click To Enlarge]
http://i103.photobucket.com/albums/m135/wolfgang8810/th_DSCF1220.jpg (http://i103.photobucket.com/albums/m135/wolfgang8810/DSCF1220.jpg)
http://i103.photobucket.com/albums/m135/wolfgang8810/th_DSCF1221.jpg (http://i103.photobucket.com/albums/m135/wolfgang8810/DSCF1221.jpg)



Got it for $160

[livwire68]

I carry different ones all the time. Usually the first I find. I think I will be ordering some more soon. If anyone has something specific they want, let me know! I am a knife dealer, and only sell to friends or use for fundraisers. You pay my cost plus a little for shipping to me then about $5 usps priority to you. My cost is typically just a few dollars over half of retail. There are however some brands who think they have the only knives out there and charge more than half, cant remember who right off hand. I do have to place a min. order of $100 most of the time 2-3 knives meet that requirement.

[Sr Mike]

I always carrying something different depending on which one is currently in view when I wake up in the morning, nothing special, almost all of mine fall in the under $10 range.

[poker]

I usually always carry Benchmades, but looking for a Microtech Mini SOCOM right now. Pricey though.:(

[lightning9191]

I carry a Gerber Paraframe II and a Craftsman multi-tool. I grew up in the hometown of Case. They are nice knives, but I just feel there are better out there for every day carry (they look nice though).

[elderboy02]

http://i191.photobucket.com/albums/z282/elderboy02/SWExtremeOpsKnife.jpg

[N2Advnture]

I always carry a pocket knife. Usually a small Kershaw or a my great grandfather's Kamp-King.

Today I ordered one of the 1893 Heritage Swiss Army Knife (limited to 1893 made). We'll see if they (Wenger) actually lets me order it.

[AriesOpusX]

I carry a smith&wesson hawk bill, mainly because its razor sharp and my wife gave it to me.

http://eknives.com/Merchant2/graphics/00000001/SWCK32C-hawkbill.jpg

[N2Advnture]

I always wanted a Microtech Tactical Halo III 3 OTF Automatic Knife but believe you need to be military or le to purchase one (that and they are $275!).

[pearson]

http://imgcash1.imageshack.us/Himg174/scaled.php?server=174&filename=dsc01029ki6.jpg&xsize=640&ysize=480

I have been carrying the benchmade lately because i lost my favorite kershaw the black one when i moved. but i am looking for another black one the 1570.

[Ashcan Bill]

I'm seldom without a pocket knife. The last few years I've relied primarily on a Spyderco MeerKat. I've got others I pick up on occasion, but the little Spyderco is my favorite. Sharpens well, is unobtrusive, and has a slick closing action. A flick of the wrist with the lock disengaged and it snaps shut. The AUS-6 steel doesn't hold the edge as long as I'd like, but sharpening it gives me something to do when I'm sitting in the courtyard smoking.

[longknocker]

Leatherman "Juice" for daily carry, although I collect a variety of knives. Leatherman just seems to do everything in one knife.:tu

Greg

[Ace$nyper]

G10 Spyderco Harpy, had it for what seems like ever, GREAT knife I don't leave the house with out it.

[AAlmeter]

http://www.kershaw-knives.net/images/Kershaw-leek-1660-350x350.gif

[SvilleKid]

http://www.kershaw-knives.net/images/Kershaw-leek-1660-350x350.gif

Love Ken Onion's knives!! Have half a dozen between my son and I. Great steel, and really good customer service on repair issues.

[gvarsity]

http://www.outdoorpros.com/images/prod/5/Schrade-7OT-rw-11745-21514.jpg
Schrade Old Timer

http://www.knivesplus.com/media/GB-8461.jpg
Gerber GB-8461 AR 3.25, Part Serrated Edge

Also have a mini Vic on my key chain.

[TripleF]

No pics, but I carry a Vic Swiss Army Classic Pocket Knife and a Spyderco Spydercard knife (gifted to me by JaKaAch)

[Wolfgang]

Spyder cards are awesome! Im looking for the spyderfly but cant find one :-(

[MLC]

Lately I've been carrying the columbia river most of the time on strong side - love the double locking feature and quick opening assist. -the gerber multi-tool is always close by in my bag or vehicle (works better than some standard tools)
http://i136.photobucket.com/albums/q161/25box/HPIM0811.jpg

[King James]

passively trying to find myself a griptillian that is under 3''

[JKim]

Used to carry a Spyderco with moderate regularity years ago. I've retired to just a Swiss Key. It does just about everything I need it to in a pinch. Don't have to worry about any sort of security issues either. It's innocuous.

http://www.swisstechtools.com/productdetail.aspx?PID=VZ75GDTdP68A

And yes, it has a tiny blade, so it could be considered a pocket knife? :]

[theycallmedan'lboone]

CRKT M-14 SFA (made in the USA )
http://www.notyourmamasknives.com/components/com_virtuemart/show_image_in_imgtag.php?filename=resized%2FColumb ia_River_M_48b5dff919035_200x200.jpg&newxsize=200&newysize=200&fileout=

gerber Evo jr for when I shouldn't pull out the big daddy
http://www.gerbergear.com/images/products/22-01493-1.jpg

[N2Advnture]

Love Ken Onion's knives!! Have half a dozen between my son and I. Great steel, and really good customer service on repair issues.

The "Chive" is my go to pocket knife!

[SeanGAR]

http://filebox.vt.edu/users/okeefes/AM1002HJB%5Blarge%5D.jpg

Course I ditched the leather sheath in about 2 seconds.

[N2Advnture]

Who has the best prices on pocket knives?

EDIT:

This place seems to have pretty good prices (although I can't vouch for them)

http://www.sonomacutlery.com/store/home.php?cat=377

~Mark

[livwire68]

Even though I am a Kershaw fan, I think I am ordering this next week Or when it comes back in stock.
Not a pocket knife.

http://i135.photobucket.com/albums/q139/livwire68/17BO110.jpg

[Hardcz]

I need to figure out a knife I can carry at work to abuse... that doesn't mind cutting ethernet cables when needed, stripping casings, cutting my food when needed, prying things, and yea... abused

[Mr.Maduro]

I don't actually carry it that often, but here's mine....

Its the Van Hoy Snap Lock from Columbia River.

[Stog-a-Boy]

http://www.kershaw-knives.net/images/Kershaw-leek-1660-350x350.gif

nice :ss

I have 3 Kershaw knives.

http://i37.tinypic.com/21c8phd.jpg

[Stog-a-Boy]

I also have this knife. Don't use it much, its more of a looking knife because its so shiny :D

http://ecx.images-amazon.com/images/I/31BX3WXY01L._SL500_AA280_.jpg

[King James]

I'm confused on WI knife laws as far as being able to carry one. Have found some places that say 3'' or under is okay.....other sites that make it look like it reads that no carrying is allowed.

[livwire68]

I'm confused on WI knife laws as far as being able to carry one. Have found some places that say 3'' or under is okay.....other sites that make it look like it reads that no carrying is allowed.

Depends on the state Usually 3"-4", Also Nevada does not consider it concealed if the pocket clip is visible. Best thing to do is call local cutlery shop or LE, even then I get mixed answers for somethings.

[N2Advnture]

FYI - This place has pretty good prices as well!

http://www.theknifestore.com/servlet/StoreFront

I hope this helps

~Mark

[Lucky_Hippo]

EDC to the office for me is either a Victorinox Recruit or a Victorinox Cadet. I have many others ie (BM)Griptillian, Buck 110, (BM)Pika, Case Canoe... but the good old vic's are the one's who get used the most. Mainly because I'm not afraid to misplace them and they don't scare the sheep at work.

They may not be flashy, but they are true workers. :ze

[Boobar]

Benchmade/Osborne 942 has been my EDC for over 2 years now.

Benchmade AXIS lock knife = Most reliable EDC you can have. :D

http://www.cigarasylum.com/vb/attachment.php?attachmentid=263&stc=1&d=1224725013

[longknocker]

Benchmade/Osborne 942 has been my EDC for over 2 years now.

Benchmade AXIS lock knife = Most reliable EDC you can have. :D

http://www.cigarasylum.com/vb/attachment.php?attachmentid=263&stc=1&d=1224725013

Love Benchmades! Great Knives with Lifetime warranty!:tu

[matt3]

I have a few but, my favorite edc is a CR large Sebenza. I usually carry a SS Spyderco Delica Serated edge for work.

[Wolfgang]

Sweet Matt! That must have cost you a pretty penny!

I jsut ordered a Benchmade 530 at less than 2 ounces its perfect for EDC plus it uses the axis lock! I love that feature!

http://i103.photobucket.com/albums/m135/wolfgang8810/CliplessOpen01.jpg

[Steve]

Spydeco Military everyday
http://www.knifeworks.com/images/36390.jpg

Gerber Gator when I'm backpacking/Canoeing
http://images.backcountry.com/images/items/medium/GER0008.jpg

Fishing
http://www.csarmysurplus.com/images/GERBER.jpg

[N2Advnture]

This just arrived today (2 actually), absolutely beautiful!

http://www.cigarasylum.com/vb/attachment.php?attachmentid=216&d=1224613161

Today I ordered one of the 1893 Heritage Swiss Army Knife (limited to 1893 made). We'll see if they (Wenger) actually lets me order it.

[Wolfgang]

Good news! I got my knife and I shortly after cut the tip of my finger off! I love the sharpness of Benchmades! lol

[Wolfgang]

More tribute to the sharpness of benchmade. Just got the Benchmade VEX for ~$37 It is a red class knife that feels 1st class! How many other "economy" knives can fillet post its right out of the box?

http://i103.photobucket.com/albums/m135/wolfgang8810/DSCF1430.jpg

[TripleF]

I've got a new pocket knife I carry strong side. A Kershaw Ken Onion Leek assisted opening knife. :D

http://i212.photobucket.com/albums/cc32/fishforfree2/jjhhggff002.jpg

[Wolfgang]

oooooo pretty Scott!!!

[Junior]

Here are the 3 I carry the most.
Benchmade Osborne
http://img.photobucket.com/albums/v216/junior897/Daily.jpg
Mikov Buffalo Horn
http://img.photobucket.com/albums/v216/junior897/Auto.jpg
Case Canoe
http://img.photobucket.com/albums/v216/junior897/canoe.jpg

[Wolfgang]

I want an osborne so bad! Your going to make me cry. Anyone wanna trade theirs?

[ThreeSheets]

I carry one of several Emerson knives that I own. Once you buy one, you will be hooked.

[pearson]

anybody have any microtech's, I am looking for another OTF

[smokeyandthebandit05]

OK knife guys I need an opinion. Im looking at 2 different Benchmades


http://www.knifecenter.com/kc_new/store_detail.html?s=BM140SBKSN

or


http://www.knifecenter.com/kc_new/store_detail.html?s=BM140SBK



which do you think would be the better knife even thou they are the same model?

[smokeyandthebandit05]

The only difference I can tell is the texture of the handle and the metal the blade is made of

or

http://www.lapolicegear.com/beni140takn.html

[nozero]

I keep an old hand me down Uncle Henry in my drawer at work. And I've been meaning to pick up a Spyderco Cricket Stainless Steel Pocket Knife, Model C29P.

Federal Buildings can be a pita when it comes to carrying knives.

[kaelaria]

Spyderco fan here, but I don't carry it. That reminds me, I need to find a good sharpener...

[TOB9595]

Looks like the diff is ATS34 or 154CM..
BOTH are great user steels...
I have a Nimravus for a bunch of years and it is a sweet knife.
I forget which steel I have...Cause both steels are in my acceptable category.
Tom

[TripleF]

OK knife guys I need an opinion. Im looking at 2 different Benchmades


http://www.knifecenter.com/kc_new/store_detail.html?s=BM140SBKSN

or


http://www.knifecenter.com/kc_new/store_detail.html?s=BM140SBK



which do you think would be the better knife even thou they are the same model?


I like the first one better.....don't know why, just like it. :)

[Wolfgang]

I think you will like the second one better. The Almuinum handle adds extra weight and gets slippery when wet. Just personal experience speaking. If this will eb a safe queen get the aluminum if it will be a workhorse, save you self some heart break and get the G10, zytel, FRN, whatever plastic handle.

[smokeyandthebandit05]

http://www.lapolicegear.com/beni140takn.html

I went with this one instead

[cle_smoker]

I've got a new pocket knife I carry strong side. A Kershaw Ken Onion Leek assisted opening knife. :D

http://i212.photobucket.com/albums/cc32/fishforfree2/jjhhggff002.jpg

I bought my dad a similar model Kershaw, his has a section that is serrated though I believe, for Christmas a couple years ago. Been considering getting one for myself.

[ChicagoWhiteSox]

For EDC I have a SOG FlashII.

Anyone have the SOG Aegis?
http://www.sogknives.com/images/flash/AE-02/pic1.jpg

[Wolfgang]

I have only heard good tings about the Aegis. The arc lock is cool too. If you are wondering if you should get one I say yes. IMO they are better then the Flash series.

[ChicagoWhiteSox]

I have only heard good tings about the Aegis. The arc lock is cool too. If you are wondering if you should get one I say yes. IMO they are better then the Flash series.

Yeah Ive been looking at getting one. Everyone seems to like them:tu

[krevo]

Daily Carry: Benchmade Griptilian
Glove box: Sog Seal Pup
Bugout bag: Cold Steel Bushman

[Tombstone]

Question: SHould i get a SOG Trident or a CRKT M16-13?

[Roland of Gilead]

I have EDC'd this one for a looong time.

http://m-mason.smugmug.com/photos/299860030_YEYFk-XL.jpg

It now has a place of honor in my safe.

My new EDC is a Benchmade Auto mini-Rukus, like this one.

http://www.impactguns.com/store/media/bench/bench_6150.jpg


-Mark.

[Tombstone]

My new EDC is a Benchmade Auto mini-Rukus, like this one.

http://www.impactguns.com/store/media/bench/bench_6150.jpg


-Mark.

WOW!! Nice Knife.:tu

[smokeyandthebandit05]

I wanted to get one of those but they were just too expensive. I got my other benchmade I ordered a few weeks ago and to tell the truth I feel I got ripped off cause the sheath and handle style is different but the knife is so damn sharp

[floydpink]

I've got a new pocket knife I carry strong side. A Kershaw Ken Onion Leek assisted opening knife. :D

http://i212.photobucket.com/albums/cc32/fishforfree2/jjhhggff002.jpg

Mine is always clipped to my belt loop strongside as well. Great knife,

[Galaxie_xl]

This is what I carry at work.

http://i95.photobucket.com/albums/l142/rickydt34/SOG-TF-7-rw-9692-7518.jpg

[Tombstone]

This is what I carry at work.

http://i95.photobucket.com/albums/l142/rickydt34/SOG-TF-7-rw-9692-7518.jpg

Nice, would you recommend the SOG. Thanks?

[kelmac07]

I carry a small Gerber and a Benchmark.

[Roland of Gilead]

I wanted to get one of those but they were just too expensive. I got my other benchmade I ordered a few weeks ago and to tell the truth I feel I got ripped off cause the sheath and handle style is different but the knife is so damn sharp

Benchmade's are worth every penny, IMHO.


-Mark.

[Galaxie_xl]

Nice, would you recommend the SOG. Thanks?

Absolutely, great knife. Feels very solid and it's sharp as hell.

[Brett C]

I have been carrying a Kershaw leek for the last couple of years but I sure do like the looks of some that have been posted.. I have had my eye on the benchmade osborne for a while as well,, maybe someday the timing will be ight.. I do like the opening assisted knives the best, We can't have an auto here in Colorado

Brett

[cigars_n_scotch]

I'm about to pull the trigger on these three beauties!

Benchmade Griptilian Axis Lock 3.45" Black Combo Drop Point Blade
Benchmade Nimravus Fixed Tanto Combo Edge w/BK1 Coating 4.5" Blad...
Gerber Gator Serrater, 5" Closed, with Sheath

from knifecenter.com

:tu:wo

[smokeyandthebandit05]

I'm about to pull the trigger on these three beauties!

Benchmade Griptilian Axis Lock 3.45" Black Combo Drop Point Blade
Benchmade Nimravus Fixed Tanto Combo Edge w/BK1 Coating 4.5" Blad...
Gerber Gator Serrater, 5" Closed, with Sheath

from knifecenter.com

:tu:wo

I have both Benchmades and absolutely love both! The Griptilian has done everything from cutting steak to cutting dry wall and everything in between. I just got the Nimravus last week with the black coating and modified tanto combo edge and so far this thing is so sharp I didnt even know I cut myself. Both worth the money!!!! :tu:tu:tu

[Tombstone]

I just bought a Benchmade Griptillian. I cannot wait for it to be delivered.

[Wolfgang]

I just bought a Benchmade Griptillian. I cannot wait for it to be delivered.

You will not be disappointed!

[Diesel Kinevel]

You will not be disappointed!

+2:dance:

what color is the handle? OD or Black?

[Wolfgang]

I have a black full sized and a blue small grip. they are so handy and fun to play with!

[Tombstone]

+2:dance:

what color is the handle? OD or Black?

Black..Check it out
http://www.thebladeshop.com/Benchmade_Griptilian_BM550HG_p/bm550hg.htm
:tu

[Wolfgang]

ooooo I like the hole! (please dont delete) thats one sexy knife

[skullnrose]

Sorry for the crummy pic but can anyone tell me what knife this is?
http://i209.photobucket.com/albums/bb291/BorderOfMexico/Weapons/106_0213.jpg

[Wolfgang]

Im not 100% sure but I would guess a schrade or a buck

[Darrell]

My girlfriend bought me a Benchmade Griptillian 551 today. Great knife!

[Robert Mabona]

this has been my carry-kit for about 3 years.
http://s993.photobucket.com/albums/af60/corkthief/?action=view&current=IMG_0283.jpg

[Darrell]

this has been my carry-kit for about 3 years.
http://s993.photobucket.com/albums/af60/corkthief/?action=view&current=IMG_0283.jpg

Where do you put the Opus X box? :confused:

























:D

[junkinduck]

My summer carry is a case medeum stockman CV with yellow scales. And a KEL TEC P3AT. Winter with jeans I carry a little heavier Case trapper, SOG multitool, and a Colt .45 ACP. Slacks I go back to the summer carry.

[Robert Mabona]

Where do you put the Opus X box? :confused:























:D

on the passenger's seat

[DBall]

Lockout bought me this for Christmas:

http://images.google.com/url?source=imgres&ct=img&q=http://www.knifeworks.com/images/products/detail/1725CB.jpg&usg=AFQjCNGlOuDnuNcuu2VO4ntsz6EEc3xzLA

Those chive's look pretty cool... and they seem cheap. I may get one for the car. :)

[Phiberglass]

I use a Gerber. The blade went dull pretty quickly though. I'm going with Benchmade next time.

[Robert Mabona]

buy microtech

[Veritas]

I carry a Ken Onion Chive in my front pocket.
When in uniform, I keep a Ken Onion Blackout 1550 in my cargo pocket.
I also have a Gerber multi-tool and a K-Bar tanto in my bugout bag and a Benchmade strap cutter in the center console of the car.

[sikk50]

Disclaimer: Not my pics, I'm too lazy.

This is my everyday carry knife
http://i281.photobucket.com/albums/kk215/sikk50/CRKTKISSNewNet.jpg

This is my baby, been my on duty knife for several years, very expensive and discontinued. It's actualy my second one and the fact that they are discontinued made this a very hard knife to hunt down. (I lost the first one :( )
http://i281.photobucket.com/albums/kk215/sikk50/BRzkWmkKGrHgoH-CoEjlLlfZ3LBJ5-2UnHw.jpg

Also have random assortments of Spyderco and CRKT (my dad use to sell knives and guns so CRKT use to send him a lot of freebees

[CasaDooley]

My EDC is a Spyderco Endura 4 Glock Armorers Tool with plain edge. I never leave home without it!:tu

[J0eybb]

I carry a SOG Flash I everyday. I also tend to carry my Kershaw Black Vapor II, and on occasion my n.e.c.k.

[fishstix]

I switch up my EDC knives but I've been favoring the smaller/lighter variety lately over the combat folders.

today its my Frank Centofante (mines a teeny bit different but very similar):

http://produto.mercadolivre.com.br/MLB-100437245-canivete-spyderco-frank-centofante-usa-_JM

I also like carrying a small william henry automatic.

eventually I'll buy a custom like a mel purdue but that can hold off for a little while.

[gettysburgfreak]

I need to get myself a nice tactical knife for work. What are some good options around $75 bucks? I want it to be assisted opening and have a partial serated blade. I want something cheap until I decide to get an automatic knife with my creds.

[CigarNut]

I ran into one of the RP reps and he has an older Swiss Army Knife with a cigar scissor -- I love it. Unfortunately, they do not make it anymore. The closest you can get is an SAK with a punch.

[captain53]

Kershaw - Ken Onion - Chive I have carried it for several years and really like it. 2" blade so legal anywhere but does most everyday job well. I don't think they make the exact one I have anymore it is black & gold with a black blade very similar to this newer one that is all black. The assisted opening is great with a super fast dependable system.:tu

http://www.kershaw-knives.net/Kershaw-Chive-Black-1600BLK.htm

[Scothew]

I need to get myself a nice tactical knife for work. What are some good options around $75 bucks? I want it to be assisted opening and have a partial serated blade. I want something cheap until I decide to get an automatic knife with my creds.

I carry a Kershaw Blur in the tanto blade everyday and its a wonderful knife.
http://www.amazon.com/dp/B0009VCA0I/ref=asc_df_B0009VCA0I1034247?smid=ATVPDKIKX0DER&tag=googlecom09c9-20&linkCode=asn&creative=380341&creativeASIN=B0009VCA0I

I love the feel of the handle, its a great size for my hand and teh assisted opening is smooth and controlled, doesnt feel like its gonna flip out of your hand if you dont have a good grip on it.

Im my fire department turn out gear, I carry the same knife, but in the rescue model, which has a blunt tip and a window punch on the end (never used it). Its got a different type of sereted edge, whihc both are equally good. I think the rescue model works better on things like cord and other smaller diameter objects, as where my tanto one works better on larger objects due to the "deeper" serated parts.
http://www.amazon.com/Kershaw-Rescue-Black-Partially-Serrated/dp/B000IXE2K8/ref=sr_1_8?ie=UTF8&s=sporting-goods&qid=1266359503&sr=1-8

[replicant_argent]

I usually carry this model Zero Tolerance. 0350. I like the DLC coated blade, G10 scales, S30V steel, FAST deployment with Speed Safe, 4 position clip for preferred carry.
http://www.knifeworks.com/images/products/detail/ZT0350.jpg

[Roland of Gilead]

My daily carry these days.

http://m-mason.smugmug.com/Miscellaneous/Misc/rukus-028-1/593228891_J9GzY-XL.jpg

-Mark.

[J0eybb]

I usually carry this model Zero Tolerance. 0350. I like the DLC coated blade, G10 scales, S30V steel, FAST deployment with Speed Safe, 4 position clip for preferred carry.
http://www.knifeworks.com/images/products/detail/ZT0350.jpg

I got to handle a bunch of ZTs at shot show. They are very nice.

[TripleF]

Just got birthday-shank-bombed a CRKT Rollock knife. Waaaaaaaaaaaaay cool....


http://i212.photobucket.com/albums/cc32/fishforfree2/5212k.jpg

[boom]

Have had this CRKT Ryan Seven for about 10yrs now...
http://www.noze-nuz.com/crkt/cr6813.jpg

[Whynot]

Several different Kershaws and Hide-away-knives. Do a search for hide away knife, pretty handy little knife. I have the utility version in straight blade and claw.

[kenstogie]

What is the best way to sharpen your knife?
What about your kitchen knives (semi decent stuff Ja Henkels)
What if your EX-significant other abused them (kithchen knives) and they are all nicked up?

I figure you guys probably have links to this info or maybe it's a personal preference thing.
Thanks for your replies!
Ken

[replicant_argent]

Picked up a DLC combo edged Leek at the show this week. I hate flying in and not having a blade. Felt good to rectify the problem. ;)

http://www.kershaw-knives.net/images/kershaw-leek-1660CKTST-600x600.gif
the serrated edge is slightly different, a uniform scalloped grind rather than the compound serrated grind here, but an elegant, sharp, thin bladed gentlemans knife, I think. Love the speedsafe open on the Ken Onion designs.

[Wolfgang]

Just added another Kershaw yo my collection. Finally a reasonably priced auto ($60). Its not cheap feeling either. The aluminum handle is very light, very thin, and very cool.

Model 7000 Breakout.

http://i103.photobucket.com/albums/m135/wolfgang8810/KS7000.jpg

* Steel: Sandvik 14C28N stainless steel
* Handle: CNC-machined aluminum
* Lock: Push button / slider safety
* Blade: 3 1/2 in.
* Closed: 4 1/2 in.
* Made in USA

[Wolfgang]

Knife up for sale.

http://www.cigarasylum.com/vb/showthread.php?p=783565#post783565

[captain53]

Just added another Kershaw yo my collection. Finally a reasonably priced auto ($60). Its not cheap feeling either. The aluminum handle is very light, very thin, and very cool.

Model 7000 Breakout.

http://i103.photobucket.com/albums/m135/wolfgang8810/KS7000.jpg

* Steel: Sandvik 14C28N stainless steel
* Handle: CNC-machined aluminum
* Lock: Push button / slider safety
* Blade: 3 1/2 in.
* Closed: 4 1/2 in.
* Made in USA

That is very nice for that kind of $. :tu

[nomadicwookie]

I'm a bit of a knife nut. Here are some of my favorites from left to right. Mick Strider Custom XL SLCC, Strider SMF, Emerson Combat Karambit. The SMF is my work horse. Tough as hell. Any other knife nuts on here? Whatcha got?

[Darrell]

http://img169.imageshack.us/img169/6913/benchmade551mdp01tz5.jpg (http://img169.imageshack.us/i/benchmade551mdp01tz5.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

Benchmade Griptilian, the best knife I've ever owned. I have several others, I typically buy a new knife every 6 months for one reason or another. Although this Benchmade gives me no reason to buy another in the foreseeable future.

[poker]

My newest daily carry is a Klotzli Walker Design. (mine has a semi serrated edge)

http://ecx.images-amazon.com/images/I/314GoRHjNHL._SS500_.jpg

[wolfandwhisky]

used to carry a 3.5" to 4" balisong with thick steel handles. had a second with a serated edge. they were great knives. kind of miss 'em.

[TripleF]

http://img169.imageshack.us/img169/6913/benchmade551mdp01tz5.jpg (http://img169.imageshack.us/i/benchmade551mdp01tz5.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

Benchmade Griptilian, the best knife I've ever owned. I have several others, I typically buy a new knife every 6 months for one reason or another. Although this Benchmade gives me no reason to buy another in the foreseeable future.

Noice Darrell!!! Real noice!! :tu

[Wolfgang]

http://img169.imageshack.us/img169/6913/benchmade551mdp01tz5.jpg (http://img169.imageshack.us/i/benchmade551mdp01tz5.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

Benchmade Griptilian, the best knife I've ever owned. I have several others, I typically buy a new knife every 6 months for one reason or another. Although this Benchmade gives me no reason to buy another in the foreseeable future.


Im carrying that exact knife currently beating the **** out of it, and its still splitting hair sharp. You made a great choice my friend. :tf

[nomadicwookie]

used to carry a 3.5" to 4" balisong with thick steel handles. had a second with a serated edge. they were great knives. kind of miss 'em.Do you remember what brand? Happen to have any pix? I've got a Benchmade 42 I carry from time to time. Lots of fun to flip.

[Darrell]

Im carrying that exact knife currently beating the **** out of it, and its still splitting hair sharp. You made a great choice my friend. :tf

It's easily the best knife I own. I have several Kershaw's, SOG's, etc. and so far Benchmade has made me a believer.

[Wolfgang]

they certainly are pricey but i love em.


P.S. my 35mm 1.8 came in about a week ago and im loving it too.

[TripleF]

The newest member to my EDC...
a Kershaw Mini Cyclone (assisted open). From what I understand it is no longer in production.

http://i212.photobucket.com/albums/cc32/fishforfree2/ebay034.jpg

[Wolfgang]

The newest member to my EDC...
a Kershaw Mini Cyclone (assisted open). From what I understand it is no longer in production.

http://i212.photobucket.com/albums/cc32/fishforfree2/ebay034.jpg
That's hot.

[gettysburgfreak]

http://img132.imageshack.us/img132/2088/1670blk.jpg (http://img132.imageshack.us/i/1670blk.jpg/)


This is the knife I use on duty, its an assisted Kershaw Blur, absolutely love it.

[TripleF]

Ewwwwwww, I like the looks of that Keshaw Blur!! Very nice :tu

[Scothew]

Ewwwwwww, I like the looks of that Keshaw Blur!! Very nice :tu

I own 2 blur's, (see pg 6) but they are some of the best assisted openers ive ever used. You would not be disapointed.

[Darrell]

The newest member to my EDC...
a Kershaw Mini Cyclone (assisted open). From what I understand it is no longer in production.

http://i212.photobucket.com/albums/cc32/fishforfree2/ebay034.jpg

Mini Cyclone?

I have a full size Cyclone. Great knife.

[Skywalker]

http://media.giantbomb.com/uploads/0/3761/321247-shiv_large.jpg
I made this in prison!!!;)

[Bill86]

Strider SMF, Knives were my first addiction. I have quite a few nice ones. Someone else had a Strider here, yeah they are BEASTS. Punch them through car doors....whatever it won't matter.

Microtech Ultratech (automatic out the front, double edge half serrated black coating)
Benchmade Mini-Rukus (satin plain edge)
Benchmade Nitrous Stryker (tanto black coating serrated)
Zero Tolerance 302 (tiger stripe plain edge)
Strider SMF (stonewashed plain edge)
Becker BK-9 (9 inch plain edge machete)
5.11 Master's Karambit (satin plain edge)

[kenstogie]

I got home real late last night and on the tube was CUTLERY CORNER and I am sure alot of the cheaper stuff was just that but some of the stuff looked pretty good. What's the deal with them any way?
Posted via Mobile Device

[JaKaacH]

The newest member to my EDC...
a Kershaw Mini Cyclone (assisted open). From what I understand it is no longer in production.

http://i212.photobucket.com/albums/cc32/fishforfree2/ebay034.jpg

The Cyclone is no long listed in the line-up on the web site or in the newest catalog. They had a lot of trouble with the on/off SpeedSafe assist opening function on this model. They probably got tired of all the warranty work, so they discontinued this knife.

[Bill86]

I got home real late last night and on the tube was CUTLERY CORNER and I am sure alot of the cheaper stuff was just that but some of the stuff looked pretty good. What's the deal with them any way?
Posted via Mobile Device

If it's on the TV...not worth owning. If you want a decently priced good folder get a Benchmade Griptillian or mini-griptillian depending on your states carry law.

[nomadicwookie]

Strider SMF, Knives were my first addiction. I have quite a few nice ones. Someone else had a Strider here, yeah they are BEASTS. Punch them through car doors....whatever it won't matter.

Microtech Ultratech (automatic out the front, double edge half serrated black coating)
Benchmade Mini-Rukus (satin plain edge)
Benchmade Nitrous Stryker (tanto black coating serrated)
Zero Tolerance 302 (tiger stripe plain edge)
Strider SMF (stonewashed plain edge)
Becker BK-9 (9 inch plain edge machete)
5.11 Master's Karambit (satin plain edge)

That would be me. I've been getting rid of some knives lately, but I'll never get rid of my SMF. They're tanks.

[Darrell]

The Cyclone is no long listed in the line-up on the web site or in the newest catalog. They had a lot of trouble with the on/off SpeedSafe assist opening function on this model. They probably got tired of all the warranty work, so they discontinued this knife.

That makes sense. Aside from the "speed safe" issues I had no problems. However it went to Kershaw 3 or 4 times to have that fixed. They were always friendly and fast though.

[JaKaacH]

That makes sense. Aside from the "speed safe" issues I had no problems. However it went to Kershaw 3 or 4 times to have that fixed. They were always friendly and fast though.

I have a fix for it. Let me know when and if you need it. I can send you the parts, and PM you the instructions. You just need a small torx bit. (#6 I think) My fix eliminates the on/off switch and includes a new "reaction bar". After the fix the speed safe is on all the time like most of the speed safe models.

[Bill86]

That would be me. I've been getting rid of some knives lately, but I'll never get rid of my SMF. They're tanks.

Same I put up 3 of those for sale, my trusty SMF is never being sold. It's just a beast, getting rid of the 615 mini-rukus as the SMF and 302 are my tank knives.

[poker]

Just picked up a new Benchmade 907 Mini-Nitrous Stryker.

http://www.nexternal.com/useg/images/9072_x.jpg

[Wolfgang]

Nice! Way to go Kelly!

As for me. Microtech UTX 85 ive wanted one for as long as I can remember now all I have to do is wait for it to get here. :tt

http://www.bladehq.com/imgs/out-the-front-automatics/microtech-otf/utx85-otf-series/microtech-utx-85-satin-standard-125-4.jpg

[TripleF]

Noice Kelly :tu

Noice Mark!! :tu

I just ordered a SOG Twich I on ebay :D

[Wolfgang]

Noice Kelly :tu

Noice Mark!! :tu

I just ordered a SOG Twich I on ebay :D

Careful Scott. The Shank Fairy has been restless. :tf

[TripleF]

Careful Scott. The Shank Fairy has been restless. :tf

True he has, he stopped by and talked with me just the other day! :D

[Wolfgang]

His outfit this year sure was looking sharp.

[docdoty]

Kelly, those benchmades are great knives you will love it. I have one of them as well.

[Wolfgang]

im sick. Just ordered another microtech.:sh

[poker]

Unreal. Was showing my father my new Benchmade last night, and he sees the butterfly logo on the blade. He says "Hey I think thats the same logo on the knife you gave me like 10-12 years ago."
We go out to his car where he has it in the driver door side pocket. He pulls out a knife I forgot all about that I had acquired somehow (I cant remember).

Its an old automatic Benchmade/Balisong Emerson Design. Its kinda filthy, so I take it apart and clean it up. Man this thing is big. Its not fast but it opens with authority.

Pics coming soon.


Cracks me up. 79 year old Japanese man with a huge switchblade in his car door pocket. :)

[Wolfgang]

hell yes! Pics or BAN! I love stories like this.

[LostAbbott]

Here is my little collection and my two Microtech's up close.

http://imgur.com/PD6oW.jpg

http://imgur.com/3mdFp.jpg

http://imgur.com/JjoEi.jpg

[poker]

hell yes! Pics or BAN! I love stories like this.

Not mine but almost identical blade (except for thumbstud/cap):

http://www.balisongmecca.com/Other_Knives/Production/Benchmade/128_2807%20copy.JPG

[TripleF]

Oooooooof those are some noice knives right there. :dr

[LostAbbott]

Yeah I carried the Lightfoot L.C.C DA for a few years but I think tip up carry does not work as it tended to work open a little, also the leaf spring is starting to wear out, as well as the design of the knife is kind of lacking in my opinion. Also I am not a fan of the 20s-v steel as it is really hard to get razor sharp. Fun knife and I got a great deal on it back in 2003. What they are going for now is totally nuts.

[Wolfgang]

http://imgur.com/JjoEi.jpg

I certainly want one of thems! The Kestrel is an awesome design. I just ordered the LUDT.

Curious, How had the black finish held up on yours? Im planning on EDCing mine.

As for Kelly. That is an awesome knife. I love Benchmades and the Made in USA is certainly a feature Im willing to pay a bit more for.

I think it is time for a family photo of my collection. :tf

[TripleF]

I think it is time for a family photo of my collection. :tf

Do Eat Mon. Do Eat!!!

[Wolfgang]

http://fc04.deviantart.net/fs70/i/2010/315/a/9/knife_family_by_wolfgang8810-d32mwmq.jpg

Any questions? Feel free to ask. I love my babies.

[TripleF]

Knice Knives bro. :tu

[Wolfgang]

Thanks boss. Woot woot!

[LostAbbott]

I certainly want one of thems! The Kestrel is an awesome design. I just ordered the LUDT.

Curious, How had the black finish held up on yours? Im planning on EDCing mine.

As for Kelly. That is an awesome knife. I love Benchmades and the Made in USA is certainly a feature Im willing to pay a bit more for.

I think it is time for a family photo of my collection. :tf


The black finish is still in perfect condition, and I have carried that knife for about a years worth of time over the 6 or 7 years I have had it. Also the 154cm is IMO the best knife steel, easy to work with and holds and edge for ever. The Kestrel is one of my favorite knives really cool design and fits very comfortable in my hand, the blade shape is also extremely useful.

[poker]

Unreal. Was showing my father my new Benchmade last night, and he sees the butterfly logo on the blade. He says "Hey I think thats the same logo on the knife you gave me like 10-12 years ago."
We go out to his car where he has it in the driver door side pocket. He pulls out a knife I forgot all about that I had acquired somehow (I cant remember).

Its an old automatic Benchmade/Balisong Emerson Design. Its kinda filthy, so I take it apart and clean it up. Man this thing is big. Its not fast but it opens with authority.

Pics coming soon.


Cracks me up. 79 year old Japanese man with a huge switchblade in his car door pocket. :)


Here are a few pics:

[replicant_argent]

Here are a few pics:

Beautiful. Love the design.

[Wolfgang]

Because I was losing money if I diddnt buy it. :sh
http://www.bladehq.com/imgs/side-opening-automatics/microtech-auto/microtech-ludt-green-135-1gt.jpg

[LostAbbott]

Because I was losing money if I diddnt buy it. :sh
http://www.bladehq.com/imgs/side-opening-automatics/microtech-auto/microtech-ludt-green-135-1gt.jpg

Losing money? How? Got the Benchmade today. It is freaking tiny.. Way smaller than I was thinking for some reason, Returning it for this knife, but black on black with silver screws, plain edge.

[Bill86]

If I was getting a Microtech Auto I would just get an OTF, in fact once I get a job I see a shiny new Halo III in my near future.

If you're getting an LUDT get an old one. I've heard bad things about most new Microtechs. Poor quality....the old stuff was better.

[Wolfgang]

Losing money? How? Got the Benchmade today. It is freaking tiny.. Way smaller than I was thinking for some reason, Returning it for this knife, but black on black with silver screws, plain edge.

"Losing money not buying it" Just a saying to justify my purchase. The LUDT is a fantastic knife based on my first impression test. Fires with authority and has a solid lockup up down and side to side. And will fillet notebook paper. The finish while very durable (after dropping it off the counter onto slate floors) does have a unique feel to it.

If I was getting a Microtech Auto I would just get an OTF, in fact once I get a job I see a shiny new Halo III in my near future.

The Halo III is a wonderful knife but for the price Id want something auto retracting. Unless its for a collection.

At double the price for roughly the same size as the benchmade? This doesn't make sense. The UTX 70 is a key chain knife and the UTX 85 isn't much larger than the mini grip. I will say with every OTF ive ever handles ther is always blade play side to side and up and down. Its the nature of the beast, however, locking in the out position is rock solid and very reliable.



If you're getting an LUDT get an old one. I've heard bad things about most new Microtechs. Poor quality....the old stuff was better.

I would love to see where youve found this information.

[Wolfgang]

comparison. The UTX 85 (3.1")is pretty close lengthwise to the LUDT (3.4") but the LUDT has far more belly and would serve better in the EDC role IMO, and the Benchmade is too small unless you are looking for a sheeple friendly knife.

:note: serial numbers removed so no one steals and trys to misrepresent my picture.
http://i103.photobucket.com/albums/m135/wolfgang8810/knives-1.jpg

[LostAbbott]

dammnit wolf that is not helpful. I had just given up on the microtech and decided on a pro-tech Monaco, which looks pretty damn cool to me... I think I will go that way anyway but the LUDT does look totally bad ass as well...

[Wolfgang]

If looks is the final factor thats up to you. But for less money you get a better blade steel CPM S30V opposed to the 154CM of the Protec. Im sure you'll be happy either way

[longknocker]

My Favorite Auto: Microtech L-UDT From 2006. Awesome Knife That Resharpens Easily!:)
http://i859.photobucket.com/albums/ab159/tallg/Knives/DSC_0154.jpg


http://i859.photobucket.com/albums/ab159/tallg/Knives/DSC_0153.jpg

[Wolfgang]

Awesome Greg! :tu Im jelous that yours still used Torx screws. The triwing screw set is just plain annoying.

[longknocker]

Awesome Greg! :tu Im jelous that yours still used Torx screws. The triwing screw set is just plain annoying.

Thanks, Mark!:) It's Very Heavy Duty.
My Newest Addition To My Collection:
William Henry Jeweled Titanium Model HRC 67 That I Picked Up In Alaska:
http://i859.photobucket.com/albums/ab159/tallg/Knives/DSC_0155.jpg

http://i859.photobucket.com/albums/ab159/tallg/Knives/DSC_0156.jpg

[Wolfgang]

Dam Greg, I diddnt know you were a collector. Lets see a family photo.

[longknocker]

OK, One More.:D I Have Over 300 Pocket Knives, Mark. Started Collecting Them Before I Got Into Cigars. Here's My Favorite: Chris Reeve Classic:
http://i859.photobucket.com/albums/ab159/tallg/Knives/DSC_0158.jpg

http://i859.photobucket.com/albums/ab159/tallg/Knives/DSC_0159.jpg
Sharp As A Razor & Tough As Nails! Ouch! Just Nicked My Finger Closing The Blade.;)

[Bill86]

Nice I was a pocket knife buyer before cigars. I've downsized my collection so many times I've only got 3 left.

[longknocker]

Nice I was a pocket knife buyer before cigars. I've downsized my collection so many times I've only got 3 left.

You Were Smart, Bill!:tu I Can't Seem To Part With Mine.:)

[Wolfgang]

OK, One More.:D I Have Over 300 Pocket Knives, Mark. Started Collecting Them Before I Got Into Cigars. Here's My Favorite: Chris Reeve Classic:
http://i859.photobucket.com/albums/ab159/tallg/Knives/DSC_0158.jpg

http://i859.photobucket.com/albums/ab159/tallg/Knives/DSC_0159.jpg
Sharp As A Razor & Tough As Nails! Ouch! Just Nicked My Finger Closing The Blade.;)

:dr I think I just turned green with envy! Will trade photo lessons for knives

[longknocker]

:dr I think I just turned green with envy! Will trade photo lessons for knives

:r I Think You Would Lose There, Brother! I Think I'm A Hopeless Case In The Photography Dept.:D

[Wolfgang]

I can teach anyone. Give me a weekend. Im not a classroom teacher im a real world teacher we'll go on a weekend expedition to a park and Ill learn you real good.

[Silound]

Does anyone here own a Mad Dog Taiho (the original 9" model)? They're discontinued now as I understand it, and newer models are out.

[TripleF]

I can teach anyone. Give me a weekend. Im not a classroom teacher im a real world teacher we'll go on a weekend expedition to a park and Ill learn you real good.

I'm in......assuming your talking about educating me on knives...

[Eleven]

Anyone have recommendations for a decent Punch Knife? My daughter wants to get her Marine husband one for Xmas.

[LostAbbott]

If looks is the final factor thats up to you. But for less money you get a better blade steel CPM S30V opposed to the 154CM of the Protec. Im sure you'll be happy either way

You know I have been thinking about this and I really like the 154cm much better than any of the sv variants. I have one knife that is sv20 and another that is the 30. Both are hard as hell to get sharp and I would say don't hold an edge any better than the 154, which is just a little harder to sharpen than 440.

I got the Monaco and really like it. The only thing that bugs me is that the bolster black is different than the blade black, but I think that is due to the steel vs. aluminum. Will post up a picture is a bit.

-M

[Bill86]

You Were Smart, Bill!:tu I Can't Seem To Part With Mine.:)

IMO there is only 2 knives you NEED. A Hinderer XM-18 and a Strider SMF. Call it the beauty and the beast. However Knife buying is like cigar buying....none of us NEED half of what we have but we all justify it. I still will hunt for that elusive retardedly expensive XM-18. They are fantastic knives and if you can score them for $380-$415 or so it's a steal.

Anyone have recommendations for a decent Punch Knife? My daughter wants to get her Marine husband one for Xmas.

Yes, I bought my brother a Benchmade punch knife, they are fantastic. Paracord wrap the handle and it's a great knife. There aren't too many punch knives out there, you could look at cold steel but there over the top marketing has me not buying their knives. More recently I gifted him a Microtech UTX-85. So far both knives are :tu :tu.

Of course these are just my opinions and everyone else might not have the same opinion. Knives are definitely a preference.

[LostAbbott]

I figured since everyone is getting all fancy about their photography skills I ought to step up my game(seeing as how I call myself a professional and all that)


http://imgur.com/fERoj.jpg


http://imgur.com/Ybk0P.jpg

These are my three favorite fancy knives.
http://imgur.com/uoKLP.jpg

[Whynot]

Anyone have recommendations for a decent Punch Knife? My daughter wants to get her Marine husband one for Xmas.

Not really a punch knife, but I listed this several pages back. I have a couple and they have served me well on several deployments. http://www.hideawayknife.com/main.php

[Bill86]

Now that you mention HAKs....I think also a nice waved knife would be a good gift. Anything from Emerson, I also like the Tarani Karambit. I'm about to send mine out to get waved I'll post up a picture in a month or so. Basically you just pull the knife out of your pocket and it's blade is deployed in that one swift motion.

[cigars_n_scotch]

How many of you who daily carry a knife work in a white collar job? Or maybe the question is do any of you who are white collar workers carry a knife? The reason I ask is because I like knives but I find it hard to justify carrying one daily because of my job and the type of work that I do (there's really no need for one on a daily basis) I wear either a suit to work (if I'm meeting with clients) or slacks/khaki's and a button-down dress shirt. Most of the time I just leave it in my truck.

Sometimes I wish I did something more casual, but this pays the bills...

[longknocker]

How many of you who daily carry a knife work in a white collar job? Or maybe the question is do any of you who are white collar workers carry a knife? The reason I ask is because I like knives but I find it hard to justify carrying one daily because of my job and the type of work that I do (there's really no need for one on a daily basis) I wear either a suit to work (if I'm meeting with clients) or slacks/khaki's and a button-down dress shirt. Most of the time I just leave it in my truck.

Sometimes I wish I did something more casual, but this pays the bills...

I Carry One To Work Maybe 1/2 The Time To Open Boxes, Etc. I Always Carry A "Cheaper" Knife In Case I Lose It. :2

[Bill86]

If you work in a white collar job just keep a nice folder with you. I use my knives to open packages and letters mostly. I don't work white collar jobs but no one is going to frown on you for carrying a knife. Get a nice CRK and people will find it quite classy. You can always remove the pocket clip and let a knife sit in your pockets. Attaching a paracord lanyard helps but it kinda loses the gentleman effect. I always have at least one knife on me, sometimes two.

[Ranger_B]

Anyone have recommendations for a decent Punch Knife? My daughter wants to get her Marine husband one for Xmas.

Might want to check out Tops. I have a couple of their knives and they work great here is one http://www.topsknives.com/product_info.php?cPath=1&products_id=78 .

[nomadicwookie]

Not really a punch knife, but I listed this several pages back. I have a couple and they have served me well on several deployments. http://www.hideawayknife.com/main.php

Be cautious of hideawayknife.com. Front Sight has developed a very bad reputation with customers and virtually every knife maker they have collaborated with. I would recommend trying to find one on the secondary market. Just my:2

[Wolfgang]

http://www.casexx.com/LargeImages/77183.jpg (http://www.casexx.com/DisplayDetailPage.asp?ProductCode=77183)

Im by no means a white collar guy, however, my father worked his way up through the banking ladder from delivery boy in 1950 to Sr VP in 2009. He always had a nice folder in his pocket. In my case I refer to this style as a Church knife. The picture attached would be a nice option with a good combination of form and function. (click the picture to go to the website for price)

[Wolfgang]

These are my three favorite fancy knives.
http://imgur.com/uoKLP.jpg

I still call dibbs if that Kestrel comes up for sale. :tu

[LostAbbott]

I still call dibbs if that Kestrel comes up for sale. :tu

If I ever sell it, I will talk to you first.;)

[Hippi3Slay3r]

Im not a huge knife guy but I do love me some Balisongs!

Christmas gift from my buddy (Benchmade 51 Morpho)
http://i101.photobucket.com/albums/m50/Cindel_bucket/xmas001.jpg
And the small but ready to grow collection
t2b
BM 51 Morpho, Bradley Kimura II, Bradley Kimura VII, Bradley Mayhem titanium
http://i101.photobucket.com/albums/m50/Cindel_bucket/xmas004.jpg

From what I understand the Bradley's are all made by other knife companys under the Bradley name, The Kimuras are made by Kershaw and the Mayhem by Benchmade.

~Kyle

[Bill86]

Nice balisongs :tu I've always wanted to try flipping one of those....someday.

[Smokin Gator]

I bought myself a Microtech L-UDT for Christmas based on Greg's comments. Man that is one sweet knife!!! I got it from Blade HQ and was very pleased with the service. I didn't shop the price much but am happy even if I paid a few $$s too much.

[longknocker]

I bought myself a Microtech L-UDT for Christmas based on Greg's comments. Man that is one sweet knife!!! I got it from Blade HQ and was very pleased with the service. I didn't shop the price much but am happy even if I paid a few $$s too much.

My ED Carry, Brother! Great Choice!:D:tu I Think I Bought Mine From The Same Place! Best Prices I've Found, Anyway.

[LostAbbott]

I bought myself a Microtech L-UDT for Christmas based on Greg's comments. Man that is one sweet knife!!! I got it from Blade HQ and was very pleased with the service. I didn't shop the price much but am happy even if I paid a few $$s too much.

:np

[BeerAdvocate]

I got a nice Spyderco pocket knife for Christmas

[Zeuceone]

Escape a S&W spring assist.

[jquirit]

I use to EDC a Benchmade 3550SBK, but then I got a bit worried of losing it (and I need to send it back to Benchmade for some refurbishment as it's been well used) and switched over to a simple Kershaw Oso Sweet. The semi-assisted open is very nice (quick flick to get it open), and there's a nice heft to it.

It may not be sexy as my auto, but I'm also not going to get worried if it goes lost.

[Zeuceone]

escape a s&w spring assist.

i edc

[ajacobs]

Rick Hinderer XM-18 for me. I don't think a better folder is made.

[Smokin Gator]

:np

I knew that was coming... I was hoping I didn't get busted as I suck at pics, but here are a couple:
8266

8267

This is the nicest knife I have ever bought and I love it. I ain't going down another slope!!!

[longknocker]

I knew that was coming... I was hoping I didn't get busted as I suck at pics, but here are a couple:
8266

8267

This is the nicest knife I have ever bought and I love it. I ain't going down another slope!!!

Aw, Come On, Brent! You Need At Least Another 100 Top Notch Knives To Display In Your ManCave!:r:D

[tobii3]

Yeah....Like THIS! (http://www.cigarasylum.com/vb/showpost.php?p=1103355&postcount=13)

:D

[Bill86]

I bought myself a Microtech L-UDT for Christmas based on Greg's comments. Man that is one sweet knife!!! I got it from Blade HQ and was very pleased with the service. I didn't shop the price much but am happy even if I paid a few $$s too much.

You are in good hands with BladeHQ. They are currently taking care of a problem in one of my autos for me. Great vendor, they deal with Microtech so you don't have to. That's a bigger favor then it sounds like. Getting a hold of Microtech by anything other than Email.......just doesn't happen.

Rick Hinderer XM-18 for me. I don't think a better folder is made.

You sir are correct, there is no better folder made....oh wait yeah there is DUH the XM-24 :r :r :r :r. I keed I keed. The XM-18/24 are the best folders out there IMHO. I gotta get one someday. I've carried one before though.

[Smokin Gator]

Aw, Come On, Brent! You Need At Least Another 100 Top Notch Knives To Display In Your ManCave!:r:D

Uh... NO!!! I'm tellin' ya. I love this one... but guns are more my thing. I have more of them than I need too, but I can't see myself going over the cliff on knives. Unless of course I kill the monthly box split:r:r

[Whynot]

Be cautious of hideawayknife.com. Front Sight has developed a very bad reputation with customers and virtually every knife maker they have collaborated with. I would recommend trying to find one on the secondary market. Just my:2

Huh, I hadn't heard that. I have 2 from them and never had any problems, of course it has been a year or two since I last bought one from them. Thanks for the heads up.

[Wolfgang]

Uh... NO!!! I'm tellin' ya. I love this one... but guns are more my thing. I have more of them than I need too, but I can't see myself going over the cliff on knives. Unless of course I kill the monthly box split:r:r

Great choice. I bought mine from the same place and I have not seen them cheaper. Im currently EDCing the OLIVE version of the L-UDT with black blade (pictured below) but ill will be buying your exact model this coming paycheck.

http://i103.photobucket.com/albums/m135/wolfgang8810/knives-1.jpg

[ir13]

Got a good deal on the display model @ Cabelas while on vacation so i couldnt pass her up, been looking for a good assisted open pocket knife for a while and nothing felt right in my hand.

http://farm6.static.flickr.com/5248/5300102286_c091b80fe9_o.jpg

Kershaw Whirlwind

[Wolfgang]

Christmas present to myself.

Benchmade Shoki

Blade Length: 2.89"
Blade Thickness: 0.090"
Overall Length: 6.67"
Closed Length: 3.79"
Blade Material: M390 Premium Stainless Steel
Blade Hardness: 60-62HRC
Weight: 1.80oz.
Clip: Sheath Clip
Lock Mechanism: Nak-Lok
Sheath Material: Leather with Clip
Class: Blue

http://www.bladehq.com/images/knives/Benchmade/benchmade-shoki-480-1.jpg

[Whynot]

Anyone have a protech don? They are such a badass looking knife.

[TripleF]

I just scored my first 2 Case knives on ebay. Both are Jeff Gordon limited edition collector's knives, but I've been wanting something from Case for quite a while. :wo

Oh, BTW, congrats Brent!

[Wolfgang]

:hm:hm Have you now Scott :hm:hm

[longknocker]

Christmas present to myself.

Benchmade Shoki

Blade Length: 2.89"
Blade Thickness: 0.090"
Overall Length: 6.67"
Closed Length: 3.79"
Blade Material: M390 Premium Stainless Steel
Blade Hardness: 60-62HRC
Weight: 1.80oz.
Clip: Sheath Clip
Lock Mechanism: Nak-Lok
Sheath Material: Leather with Clip
Class: Blue

http://www.bladehq.com/images/knives/Benchmade/benchmade-shoki-480-1.jpg

Nice Pick-Up, Mark!:tu

[Bill86]

I just sent in my 5.11 Masters Karambit to get it waved for instant deployment. Pictures in a week or so.

[nomadicwookie]

I just sent in my 5.11 Masters Karambit to get it waved for instant deployment. Pictures in a week or so.

Sweet! Who's doing the work for you?

[cigars_n_scotch]

A christmas present from my parents (I lost my previous two pocket knives, a Gerber and a Benchmade Griptilian)

Boker AK-74 (Automat Kalashnikov)
http://i156.photobucket.com/albums/t39/newmanium/Firearms/IMG_5708.jpg

:tu

[Wolfgang]

Nice Pick-Up, Mark!:tu

still waiting for it to ship. It was a limited release new years thing. I cant wait to get it in my grubby little paws. I promise not to pull a Scott and accidentally cut myself the first day hahahahha

:r

[Bill86]

I just sent in my 5.11 Masters Karambit to get it waved for instant deployment. Pictures in a week or so.

I told a few people I'd toss this beast up after it was finished.

http://i801.photobucket.com/albums/yy292/Bill1986/IMG_0245.jpg?t=1294384479

Wave modded for instant deployment. I'll be looking to get a similar custom knife done with more blade length and width. Probably a double edge sharpened tip. Sometime later this year probably we'll see.

[mscales]

I carry a Kershaw Chive all the time. I use it as a money clip so most people never know i have it even when i take money out of it. I also have a pretty good collection of knives, over 300 last time I counted, and I carry different knives at different time for different reasons. but I do have a few favorites. Benchmade is one I have a couple of that I carry.

Benchmade 850:
http://img.photobucket.com/albums/v148/mscales/Knives/Benchmade850.jpg

and the 690:
http://img.photobucket.com/albums/v148/mscales/Knives/033.jpg

[Lucky_Hippo]

Just ordered a Kershaw Packrat. Really looking forward to adding it to my little group of EDC's.

[Wolfgang]

My new Benchmade just arrived in the mail. Its smaller than I thought it would be. But the first production and number 111 out of 500 is a nice touch. I love tripple numbers! My L-UDT is number 1555 and this one is 111.

Pictures shortly.

[TripleF]

I've been acquiring some vintage knives on ebay. Hoping to start a collection, but mostly to resell on ebay. One I'm looking forward to receiving is an LF&C (Landers, Frary & Clark) pocket knife.

[Wolfgang]

I'm a little late with this but Today I found out Lone Wolf was bought by Benchmade. While this may get lone wolf designs out there and more affordable Im sure going to miss the hand crafted quality of Lone Wolf. Please don't screw this up Benchmade.

R.I.P. Lone Wolf.

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183785_1861119009862_1297536532_2203669_28150_n.jp g

For those of you wondering who Paul is. Click HERE (http://www.dougritter.com/Paul_Poehlmann.htm)

[Flynnster]

Christmas present from the parents, and since my mom works for a distributer we got it at a nice discount. So far it is great, extremely sharp as my thumb and middle finger can attest to.
http://i303.photobucket.com/albums/nn146/livetocrash1992/Salute.jpg

[gravelman]

I picked up a SOG Micron II the other day...needed a knife for my keychain and so far so good. It keeps a nice edge and is durable, if only it locked.

[TripleF]

I just started a pocket knife blog if anybody is interested in following along...

www.PocketKnivesBlog.com

:noon

[Aero95]

I have a H&K knife made by Benchmade. I do have my eyes on a Chris Reeve sebenza.

[Wolfgang]

Very NICE!

I just picked up the new Spyderco Resilience and an Ontario Rat Model 1. I was looking for a larger blade without paying exorbitant prices. Pics posted later.

[Wolfgang]

Spyderco Resilience next to my Case XX trapperlock.

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/207678_1963264843444_1297536532_2350732_1747158_n. jpg

[TripleF]

You're a quick study Wolfie!! Nice pics! :tu

This CRKT Badger Gallagher 7120 Assisted opening knife has made it into my camo sheath and is getting it's fair share of use these days!

http://i212.photobucket.com/albums/cc32/fishforfree2/CRKTAssistedOpenPocketKnifeBadgerGallagher7120002. jpg


All right Wolfie, how about this pic?

http://i212.photobucket.com/albums/cc32/fishforfree2/oldtimer72OT020.jpg

[Wolfgang]

Looks great Scott. You are quite the creative spirit huh.

[Christiel49]

Hehe, the "Ice cream" truck just came to the shop! Thats what we call the tool man. Couldn't resit getting a new flash light, and ordered a very nice knife for my dad. I really had to resit getting another knife. I will post pics tomorrow!

[Wolfgang]

Way to go!

P.s. Scott, I'm pretty sharp.

[replicant_argent]

Very NICE!

I just picked up the new Spyderco Resilience and an Ontario Rat Model 1. I was looking for a larger blade without paying exorbitant prices. Pics posted later.

How do you like that Resilience, Mark? Is it the medium traction G10? What do you think of the 8cr13mov steel? Is it one that will be hard to sharpen and hold an edge, or not hold an edge but be easier to sharpen? Chipping? FFG= cool. I don't have any Spydercos, and might want to jump in the shallow end of their pool without going nuts. At 40-ish dollars, affordable, and worth it?
I have liked their designs for many years, just never taken the plunge.

[icurrie]

Got this as a gift for being in a buddy's wedding party. Beats the engraved beer mug any day!

[icurrie]

This one is always attached to my keys. Comes in very handy.

[Wolfgang]

How do you like that Resilience, Mark? Is it the medium traction G10? What do you think of the 8cr13mov steel? Is it one that will be hard to sharpen and hold an edge, or not hold an edge but be easier to sharpen? Chipping? FFG= cool. I don't have any Spydercos, and might want to jump in the shallow end of their pool without going nuts. At 40-ish dollars, affordable, and worth it?
I have liked their designs for many years, just never taken the plunge.
Its great. It fits what i was looking to do with the boxes and what not. The 8cr13mov will rust on you if you dont keep it wiped wown with rem or 3in1 oil. Im in florida and it doesnt get much more humid and ive only had an issue with one of my 8cr13mov knives. Avoid saltwater like the plague. So far with the minor things ive used it for edge retention is decent. Its very easy to sharpen. and for ~$40 for a knife with a 4+ inch blade id say you cant beat it if your looking into spydies. The G10 i would say is light to medium if you get sweaty hands it will lock in better. comes out fast and locks up strong.

Ill tell you what, if you do buy it and you dont like it ill buy it from you.

How badass would I be dual wielding resiliences?! ;s

[SteveH]

Inspired by the last thread about cutting the cap off with a knife; I picked this up:

https://lh3.googleusercontent.com/_IPGHyT92a24/Tan-g4s2_jI/AAAAAAAAGyk/hvnf5PvbNR8/s800/1000000288.jpg
https://lh4.googleusercontent.com/_IPGHyT92a24/Tan-ltEs-VI/AAAAAAAAGys/Fm93WgII4sg/s800/1000000289.jpg

I have something else coming my way....hopefully be here next week;)

[fbillings14]

http://www.cigarasylum.com/vb/picture.php?albumid=755&pictureid=5575
A good friend of mine traded me this for a dive watch i had. it is only available threw the DOD, it is a special knife Strider makes for Army EOD guys and Army Divers.

[SteveH]

Interesting - I wonder how that differs from the civi version (Strider SMF) ?

[Powers]

I carry a Case "sod buster", model 2138 SS. Great knife that comes in handy nearly every day!

http://i612.photobucket.com/albums/tt201/thegeneral320/IMAG0071.jpg

:tu

[SteveH]

Got this as a gift for being in a buddy's wedding party. Beats the engraved beer mug any day!

Nice ! I've had one of these knives for just about 10 years now. Mine was modified by a local jeweler who made these into automatics for the team I was on. The switch is hidden in the upper grip (I believe this is pretty common now adays). The main reason why we chose these is that the knife also locks closed; so if someone grabbed it out of your belt you had sufficient time to step back and aim before they figured out how to open it :D
Unfortunately the knife shows its scars and wear from the daily grind. However when it was made, the guy used some sort of graphite-impregnated derlin; so it still opens as fresh as it did 10 years ago. I tried to get a shot of the bushing...not clear but ya get the idea.
Here's some pics of the old war-horse:

https://lh6.googleusercontent.com/_IPGHyT92a24/TaoFkw9g3iI/AAAAAAAAGzA/nS_NU1ZiftM/s800/1000000290.jpg
https://lh5.googleusercontent.com/_IPGHyT92a24/TaoFnb8tw7I/AAAAAAAAGzE/H5IMgFMv_jk/s800/1000000291.jpg
https://lh5.googleusercontent.com/_IPGHyT92a24/TaoFppTgx8I/AAAAAAAAGzM/4Dm6ipsgUUU/s800/1000000292.jpg