Blazer Torch

Originally Posted by T.G

Exactly like that, you have to kind of roll upwards & forward on the back of the trigger lever to flip the safety bar out of the way before you push down or it will bind and you won't be able to flip it out of the way, just like what happened to the guy in the video the first few times.

I find it to be annoying, although maybe if I used the lighter more, I'd just get used to it.

True. Like you said though, a pair of cutters will fix the safety issue.

[CasaDooley]

Originally Posted by T.G

One thing I don't like about the PB-207 is the roll-forward safety, but a pair of diagonal cutters will fix that in a second.

Originally Posted by ChicagoWhiteSox

True. Like you said though, a pair of cutters will fix the safety issue.

Just a tip guys. If you cut the safety out you void the warranty. You can pop the safety assembly out by pushing out the side pin, then you can reassemble it if you ever have a warranty issue and need to send it back.

Originally Posted by CasaDooley

Just a tip guys. If you cut the safety out you void the warranty. You can pop the safety assembly out by pushing out the side pin, then you can reassemble it if you ever have a warranty issue and need to send it back.

Thanks for the tip Kevin. I'll just pop off the safety to avoid voiding the warranty.

I think I'm getting the "Little Buddy". Just seems like it will be easier to keep in my pocket than the PB-207. Maybe I should just get both

Got a "Little Buddy" on the way....