|
|
![]() |
#1 | |
Adjusting to the Life
|
![]()
What are you using for you internet connection? Many of the modems can be had with a built in router...
With that said, you can do one of several things: buy an inexpensive 4 port ethernet hub and put it between your rounter and other devices (acts just like a USB hub and give you more ports) get a new router - if you go this route, the big thing to make sure you get is a gigabit router 1Gb/s. While you may not use this now it will provide expandability as many newer devices are coming with 10/100/1000 ports. Balance this with the cost / need though.. If you do not need wireless do not worry about it. As for G or N, the only N device I have is my router, lol.....none of my other wireless devices support N so for me it does not matter. Quote:
|
|
![]() |
![]() |
![]() |
#2 | |
I'm back
|
![]() Quote:
At this time, I have a Qwest DSL modem (Actiontec model GT701) that has only 1 ethernet outlet in back. There will be times when the computer and TV will be used at the same time. With that being said, will any of these options give me better, or worse performance than the others? Thanks for your help. Ken |
|
![]() |
![]() |
![]() |
#3 |
Will herf for food
|
![]()
Based upon your description you may be able to just buy a 4-8 port switch. A switch can be put between your router and your TV and/or other devices. You don't need to worry about port speeds too much with the router port as I'm sure even 10/100 will be more than anything your ISP can throw at you bandwidth-wise. Even Comcast business class top of the line option is only 50mb/s. If you have any device to device transfers(inside the router) like from one pc to another then and only then will port speeds make a difference. And, in such a case a gigabit switch would still be much cheaper and easier than replacing the router.
__________________
“Eating and sleeping are the only activities that should be allowed to interrupt a man's enjoyment of his cigar;” Mark Twain |
![]() |
![]() |
![]() |
#4 | |
I'm back
|
![]() Quote:
This is the modem that I have. http://www.actiontec.com/products/product.php?pid=70 Will a port switch work with this modem and allow me to use the TV and computer at the same time? Thanks again. Ken |
|
![]() |
![]() |
![]() |
#5 | |
Adjusting to the Life
|
![]() Quote:
Looks like the modem can handle routing so a switch would work. Alternately you could connect the computer via USB and the TV via ethernet and not need the switch at all. If you need help configuring let me know and we can talk via phone or connect via webex and I can set things up for ya... Last edited by Starz26; 11-19-2010 at 07:27 AM. |
|
![]() |
![]() |
![]() |
#6 | |
Will herf for food
|
![]() Quote:
__________________
“Eating and sleeping are the only activities that should be allowed to interrupt a man's enjoyment of his cigar;” Mark Twain |
|
![]() |
![]() |
![]() |
#7 |
I'm back
|
![]()
At this time, all I have is this modem and the computer is connected to it by an Ethernet cable.
I just tried disconnecting the Ethernet cable and connecting the computer to the modem with a USB cable. The computer could not make a connection to the internet. I then installed the the software that came with the modem and still could not get a connection to the internet. I switched everything back to the Ethernet cable so I could get back online. I'm not sure why the USB won't work, but it sure sounded like a good idea if it did. If I can get it to work, then all I will need to buy is a 25 foot Ethernet cable for the TV and I'll be in business. Any ideas? Thanks again Ken |
![]() |
![]() |
![]() |
#8 | |
Will herf for food
|
![]() Quote:
I guess my question isn't that pertinent, but I am curious. Anyway, yes. If you plug this modem into an ethernet switch, then plug your TV and your computer/etc into the switch, it should work fine.
__________________
“Eating and sleeping are the only activities that should be allowed to interrupt a man's enjoyment of his cigar;” Mark Twain |
|
![]() |
![]() |