what can I use for shelves??

bobarian · 02-12-2009, 11:32 AM

I use 1/4 cedar cut to length. http://www.woodcraft.com/product.asp...4&FamilyID=680

I use 1 long piece per shelf, leaving space between the pieces for air curculation. You can fit 3 but then you need to cut holes and buy extra cedar.

Otherwise, nothing wrong with the wire shelves.

poker · 02-12-2009, 11:35 AM

or...

http://www.cigarasylum.com/vb/showth...hlight=shelves

gettysburgfreak · 02-12-2009, 11:52 AM

using the wood from woodcrafters I made my own. Cost me 60 bucks and about 10 minutes worth of cutting. I cut two boards to size and glued to smaller pieces to each end making a rectangle which allowed them to slip in the slots easy and it has a large center hole for air flow.

02-12-2009, 03:28 PM

Quote:

Originally Posted by poker

or...

http://www.cigarasylum.com/vb/showth...hlight=shelves

Thanks for the plug

Next round begins in a few weeks.

Chas

Mtmouse · 02-12-2009, 10:25 PM

You can try some of these places in your area.

http://www.boehm-madisen.com/
Woodcraft
Rockler

Or me.

eber · 02-13-2009, 04:10 PM

Quote:

Originally Posted by Mtmouse

You can try some of these places in your area.

http://www.boehm-madisen.com/
Woodcraft
Rockler

Or me.

yeah I tried those places minus the madison one and all they had was extremely warped, check your PM

Mtmouse · 02-13-2009, 04:22 PM

Quote:

Originally Posted by eber

yeah I tried those places minus the madison one and all they had was extremely warped, check your PM

Responded.

lightning9191 · 02-13-2009, 05:50 PM

I just went to Lowe's and bought some oak planks. I cut them to size and slid them in. They work fine as long as you don't have a strong desire for cedar.

MNSmoker · 02-13-2009, 10:25 PM

Quote:

Originally Posted by Mtmouse

Or me.

Tim's shelves rock! I just placed my second order with him for my second Vino.

Here's an old picture, but it shows the profile of the full height shelves and the trays. If you would like additional pictures, let me know.

02-12-2009, 11:32 AM	#1
bobarian Cranky Habanophile Join Date: Oct 2008 Location: Wine Country Posts: 8,869 Trading: (51)	Re: what can I use for shelves?? I use 1/4 cedar cut to length. http://www.woodcraft.com/product.asp...4&FamilyID=680 I use 1 long piece per shelf, leaving space between the pieces for air curculation. You can fit 3 but then you need to cut holes and buy extra cedar. Otherwise, nothing wrong with the wire shelves.

02-12-2009, 11:35 AM	#2
poker 1:11 Join Date: Oct 2008 First Name: Kelly Location: SoCal Posts: 5,280 Trading: (7)	Re: what can I use for shelves?? or... http://www.cigarasylum.com/vb/showth...hlight=shelves __________________ Cigar Asylum: A cigar board birthed without agendas, without profiting, and without advertisements. Amor puro Character is what you do when no one is watching

02-12-2009, 11:52 AM	#3
gettysburgfreak Patriot Join Date: Oct 2008 Location: The Mitten Posts: 1,442 Trading: (2)	Re: what can I use for shelves?? using the wood from woodcrafters I made my own. Cost me 60 bucks and about 10 minutes worth of cutting. I cut two boards to size and glued to smaller pieces to each end making a rectangle which allowed them to slip in the slots easy and it has a large center hole for air flow. __________________ Author ofeath, Disease, and Life at War: The Civil War Letters of Surgeon James D. Benton, 111th and 98th New York Infantry Regiments, 1862-1865.

02-12-2009, 10:25 PM	#5
Mtmouse Just in from the Storm Join Date: Oct 2008 Posts: 46 Trading: (10)	Re: what can I use for shelves?? You can try some of these places in your area. http://www.boehm-madisen.com/ Woodcraft Rockler Or me.

02-13-2009, 05:50 PM	#8
lightning9191 I think I'm normal... Join Date: Oct 2008 First Name: Kevin Posts: 1,007 Trading: (8)	Re: what can I use for shelves?? I just went to Lowe's and bought some oak planks. I cut them to size and slid them in. They work fine as long as you don't have a strong desire for cedar. __________________ I eat gummy bears by tearing them limb from limb and eating their heads last.