The Official Asylum Reef Tank Thread

[Smoking Dragon]

Originally Posted by Blueface

I just realized, a 75/90 is 48 long.
If this wet dry is 30 long, need to know how your cabinet is set up as you may not be able to manage getting this in there without dropping it down before placing the tank on the cabinet and that can be a problem down the line.

I didn't realize that either. I could make modifications to my cabinet. But, I would have to take into consideration the structure of it for safety. I downloaded plans online. It has 3 sections that are 15 3/8" wide each. My son and I are going to build it ourselves, to save lotsa money. I guess I will have to wait till it's built to look for a filter system.

[Blueface]

Originally Posted by sergeant smoky

I didn't realize that either. I could make modifications to my cabinet. But, I would have to take into consideration the structure of it for safety. I downloaded plans online. It has 3 sections that are 15 3/8" wide each. My son and I are going to build it ourselves, to save lotsa money. I guess I will have to wait till it's built to look for a filter system.

Go to Dr. Foster and Smith and see some of the cabinets they have.
You would be surprised how cheap they are.

If your plans call for three sections/openings on a 75/90 that is 48" wide, that will definitely be a problem with ANY wet dry.
Can't imagine any that will swing that opening.
I would recommend you find plans for a more traditional two door piece that has large doors and as such, limits the dead space in the center between the doors. This will give you more room to work with and specially down the line to service the tank. The worst thing you can have is a system that you can't access.

Believe it or not, that center brace on that tank is not really main support. The support is built around the four sides of the tank which will hold and distribute the wait. That center brace is more for support of the doors. Many ways around this.

Note the photos I just posted of that tank I built. Note how I practice what I am preaching and how it can be done to make for simple access in the future. That is a 300+ gallon tank and the support is strong enough yet allows awesome access to all components, even after the doors were eventually hung.