Anyone experienced with Pergo type flooring?

03-16-2010, 09:10 AM

I did my entire great room last Nov/Dec. Hopefully the shape of your room isn't as effed up as mine is

I'd recommend getting the stuff with the padding already attached (attached underlay). Also, I personally wouldn't mess with the type that requires glue. I used the "click and lock" type. It was really easy once after the first three rows. It takes awhile to get comfortable but once you do you're home free. I'd recommend a table saw for the rip cuts. I had a circular saw and used a 3 ft level as a guide but it took longer and wasn't as easy as a table saw would be. The circular saw worked fine for the angled cuts but a miter saw, if available, would be simpler. Make sure the wall you start on is straight. If it isn't then you'll have to adjust accordingly. Also make sure the last board will be at least 2 inches wide. I measured the room and divided it by the size of my laminate to make sure the last board was proper size. It was so I didn't have to rip cut my first row and last row.

I highly recommend a good pair of knee pads.

I used the internet a lot as well as a book by Stanley as resources. Check this site out. http://www.extremehowto.com/xh/artic...ticle_id=60245

Good luck!

kenstogie · 03-16-2010, 09:16 AM

Quote:

Originally Posted by Beer Doctor

I highly recommend a good pair of knee pads.

Just like at work.

Rob. · 03-16-2010, 09:21 AM

if you choose to go with a click lock type floor, make sure that you buy the thicker version. 8mm vs 12.5mm is a big difference, though it might not seem like it. I have laid quite a few floors and the ease of installment is totally different with the thicker flooring. Also, as a professional, I say go hardwood. I hate laminate. Though I do believe it has a purpose.

03-16-2010, 09:10 AM	#1
Beer Doctor Guest Posts: n/a	Re: Anyone experienced with Pergo type flooring? I did my entire great room last Nov/Dec. Hopefully the shape of your room isn't as effed up as mine is I'd recommend getting the stuff with the padding already attached (attached underlay). Also, I personally wouldn't mess with the type that requires glue. I used the "click and lock" type. It was really easy once after the first three rows. It takes awhile to get comfortable but once you do you're home free. I'd recommend a table saw for the rip cuts. I had a circular saw and used a 3 ft level as a guide but it took longer and wasn't as easy as a table saw would be. The circular saw worked fine for the angled cuts but a miter saw, if available, would be simpler. Make sure the wall you start on is straight. If it isn't then you'll have to adjust accordingly. Also make sure the last board will be at least 2 inches wide. I measured the room and divided it by the size of my laminate to make sure the last board was proper size. It was so I didn't have to rip cut my first row and last row. I highly recommend a good pair of knee pads. I used the internet a lot as well as a book by Stanley as resources. Check this site out. http://www.extremehowto.com/xh/artic...ticle_id=60245 Good luck!

03-16-2010, 09:21 AM	#3
Rob. Just in from the Storm Join Date: Feb 2010 First Name: Matthew Location: Amherst, Nova Scotia, Canada Posts: 16 Trading: (0)	Re: Anyone experienced with Pergo type flooring? if you choose to go with a click lock type floor, make sure that you buy the thicker version. 8mm vs 12.5mm is a big difference, though it might not seem like it. I have laid quite a few floors and the ease of installment is totally different with the thicker flooring. Also, as a professional, I say go hardwood. I hate laminate. Though I do believe it has a purpose.