Vinotemp & Electrical Help...

[shilala]

Originally Posted by Razorhog

Yes, the vino fan says DC 12V. The trickiest part here is going to be getting the plug off the old fan and onto the new one. I got the plastic piece off, but the little metal parts that are crimped to the wires are tough. Could I just splice it in some way?

Just cut it, splice it, solder it and heatshrink it. If the wires aren't routed in a small space, you can use wirenuts.

[JE3146]

Originally Posted by shilala

Just cut it, splice it, solder it and heatshrink it. If the wires aren't routed in a small space, you can use wirenuts.

Do this

A healthy amount of properly applied electrical tape could work in a pinch instead of heatshrink.

Just make sure the device is unplugged first