What's the best way to plug the drain on a Vino?/Edgestar?

bsmokin · 07-13-2010, 02:04 PM

I have an Edgestar 28 bottle Fridgador that I love. But I think it may have a slight leak... and I'm thinking it's the drain plug. I think i just have a piece paper towel shoved in the drain hole right now... far from perfect.

So, what are some of you using to fill this drain hole in your Fridgadors??

Thanks!

fissure · 07-13-2010, 02:06 PM

Covered both my vino drains with black duct tape

Giants85 · 07-13-2010, 02:13 PM

I've heard of people using pretty much anything. From tape to screws and now paper towels.

I would think tape would be sufficient, but in reality, having the opening is probably not a huge issue.

I haven't plugged mine and my RH stays pretty constant between 65-70.

Try some tape, electrical or duct should work just fine and see if you notice any differences.

bvilchez · 07-13-2010, 02:25 PM

Have you check out the Accessory Reviews section? It tends to have something in there. I believe someone did one up one time with pics

stewshi · 07-13-2010, 02:58 PM

I use Electrical Putty and then re route the condensation to a bowl on the bottom of the Edgestar by one of those binder dividers.

There are many different ways to do this depends on how your fridge is setup I guess.

bvilchez · 07-13-2010, 03:00 PM

You can also check out what Scott did and modify it as you see fit

Linky

T.G · 07-13-2010, 03:00 PM

Arc weld it.

kydsid · 07-13-2010, 03:03 PM

Quote:

Originally Posted by bvilchez

Have you check out the Accessory Reviews section? It tends to have something in there. I believe someone did one up one time with pics

Sure did.

Mugen910 · 07-13-2010, 03:47 PM

solder the hole shut then get some small screws and sheet metal to cover that up .

earnold25 · 07-13-2010, 03:57 PM

I used electrical putty as well.

shilala · 07-13-2010, 04:40 PM

Electrical putty is the best I ever found.

bobarian · 07-13-2010, 05:26 PM

Black electrical tape.

bsmokin · 07-13-2010, 05:32 PM

Thanks guys... I'll probably try electrical tape, since I have that handy.... and see how that goes.

Lexxxus · 07-13-2010, 05:36 PM

Use a Gurkha... any one will do

Ogre · 07-13-2010, 05:37 PM

Quote:

Originally Posted by Lexxxus

Use a Gurkha... any one will do

Dont do that, the cooler will spit it out!!!

Mugen910 · 07-13-2010, 06:11 PM

Quote:

Originally Posted by bobarian

Black electrical tape.

I thought u only had pink Bob?

Posted via Mobile Device

bobarian · 07-13-2010, 07:10 PM

Quote:

Originally Posted by Mugen910

I thought u only had pink Bob?

Posted via Mobile Device

I had to go to Home Depot to get the other stuff!

07-13-2010, 02:04 PM	#1
bsmokin Slippin... Fast. Join Date: Sep 2009 First Name: Bryan Location: South Jersey Posts: 616 Trading: (15)	What's the best way to plug the drain on a Vino?/Edgestar? I have an Edgestar 28 bottle Fridgador that I love. But I think it may have a slight leak... and I'm thinking it's the drain plug. I think i just have a piece paper towel shoved in the drain hole right now... far from perfect. So, what are some of you using to fill this drain hole in your Fridgadors?? Thanks!

07-13-2010, 02:06 PM	#2
fissure DHC Black Ops Join Date: Oct 2008 First Name: Steve Location: Grand Blanc, Mi Posts: 1,185 Trading: (48)	Re: What's the best way to plug the drain on a Vino?/Edgestar? Covered both my vino drains with black duct tape

07-13-2010, 02:13 PM	#3
Giants85 Still Watching My Back Join Date: Feb 2010 First Name: Justin Location: Monroe, NY Posts: 91 Trading: (4)	Re: What's the best way to plug the drain on a Vino?/Edgestar? I've heard of people using pretty much anything. From tape to screws and now paper towels. I would think tape would be sufficient, but in reality, having the opening is probably not a huge issue. I haven't plugged mine and my RH stays pretty constant between 65-70. Try some tape, electrical or duct should work just fine and see if you notice any differences.

07-13-2010, 02:25 PM	#4
bvilchez En búsqueda..... Join Date: Oct 2008 First Name: Bolivar aka Jay Location: Back in SoCal Posts: 3,202 Trading: (76)	Re: What's the best way to plug the drain on a Vino?/Edgestar? Have you check out the Accessory Reviews section? It tends to have something in there. I believe someone did one up one time with pics

07-13-2010, 02:58 PM	#5
stewshi Adjusting to the Life Join Date: Jun 2010 Posts: 407 Trading: (23)	Re: What's the best way to plug the drain on a Vino?/Edgestar? I use Electrical Putty and then re route the condensation to a bowl on the bottom of the Edgestar by one of those binder dividers. There are many different ways to do this depends on how your fridge is setup I guess.

07-13-2010, 03:00 PM	#6
bvilchez En búsqueda..... Join Date: Oct 2008 First Name: Bolivar aka Jay Location: Back in SoCal Posts: 3,202 Trading: (76)	Re: What's the best way to plug the drain on a Vino?/Edgestar? You can also check out what Scott did and modify it as you see fit Linky

07-13-2010, 03:00 PM	#7
T.G Grrrrrr Join Date: Mar 2009 First Name: The Other Adam Posts: 15,582 Trading: (37)	Re: What's the best way to plug the drain on a Vino?/Edgestar? Arc weld it.

07-13-2010, 03:47 PM	#9
Mugen910 I <3 Huy Join Date: Oct 2008 First Name: Location Location: First Name Posts: 8,387 Trading: (106)	Re: What's the best way to plug the drain on a Vino?/Edgestar? solder the hole shut then get some small screws and sheet metal to cover that up . __________________ I'm not antisocial, I just think people are stupid.

07-13-2010, 03:57 PM	#10
earnold25 Still Watching My Back Join Date: Oct 2008 Location: Raleigh, NC Posts: 125 Trading: (8)	Re: What's the best way to plug the drain on a Vino?/Edgestar? I used electrical putty as well.

07-13-2010, 04:40 PM	#11
shilala Dear Lord, Thank You. Join Date: Oct 2008 First Name: Scott Posts: 13,721 Trading: (252)	Re: What's the best way to plug the drain on a Vino?/Edgestar? Electrical putty is the best I ever found. __________________

07-13-2010, 05:26 PM	#12
bobarian Cranky Habanophile Join Date: Oct 2008 Location: Wine Country Posts: 8,869 Trading: (51)	Re: What's the best way to plug the drain on a Vino?/Edgestar? Black electrical tape.

07-13-2010, 05:32 PM	#13
bsmokin Slippin... Fast. Join Date: Sep 2009 First Name: Bryan Location: South Jersey Posts: 616 Trading: (15)	Re: What's the best way to plug the drain on a Vino?/Edgestar? Thanks guys... I'll probably try electrical tape, since I have that handy.... and see how that goes.

07-13-2010, 05:36 PM	#14
Lexxxus I break for Cubans Join Date: Jan 2009 First Name: Wayne Location: Winnipeg CANADA Posts: 130 Trading: (2)	Re: What's the best way to plug the drain on a Vino?/Edgestar? Use a Gurkha... any one will do __________________ Lx I invented the cordless extension cord.